Reasons for The Flipping Or Detachment of The Rubber V-belt

Analysis of the reasons for the flipping or detachment of the V-belt:

1. Quality issue with the V-belt: The purchased V-belt has poor quality, insufficient tensile strength, and is prone to flipping or falling off after prolonged use.

2. Improper installation: During the installation process, the triangular strap was not correctly installed in place, resulting in flipping or detachment during use.

3. Belt pulley wear: Long term use causes severe wear of the belt pulley, deformation of the wheel groove, and makes it impossible for the rubber V-belt to operate stably.

4. Overloading: A load exceeding the capacity of the V-belt can cause the V-belt to flip or fall off.

5. Long term non replacement: The rubber belt has been used for too long, worn severely, lost elasticity and tensile strength, and is prone to flipping or falling off.

Solution:

1. Choose high-quality rubber V-belts: Ensure that the purchased V-belts are of high quality, with sufficient tensile strength and wear resistance.

2. Correct installation: When installing the rubber V-belt, make sure to strictly follow the installation instructions to ensure that the V-belt is installed in place.

3. Regular inspection and replacement: Regularly inspect the use of the V-belt and replace it promptly if severe wear or aging is found.

4. Adjust load: Avoid letting the V-belt bear loads beyond its capacity, ensuring that the equipment operates under normal load.

5. Maintenance of belt pulley: Regularly maintain the belt pulley to prevent deformation of the groove and ensure stable operation of the rubber V-belt.

6. Strengthen maintenance: For equipment that frequently experiences the problem of triangular belt flipping or falling off, daily maintenance should be strengthened to promptly address any potential issues. Through the above solutions, it is possible to effectively prevent and solve the problem of the rubber belt flipping or falling off, ensuring the normal operation of the equipment.