Ribbed v belt,daily maintenance method and working temperature

During the normal operation of the ribbed v belt, improper maintenance or uncomfortable surrounding environment will shorten the service life of the ribbed v belt, so what is the daily maintenance method and working temperature of the ribbed v belt?

Daily maintenance method of ribbed v belt

1. Tension inspection is the key inspection item of ribbed v belt.The tension check should be one of the regular maintenance items of the triangle. Too low tension will cause the belt to slip and lead to the early failure of the belt overheating. The overheated belt transfers heat to the wheels and drive shafts of the drive system and overheats the bearing oil.

2. To prevent pollution, use it to prevent oil and mud from sticking to it, avoid contact with corrosive substances such as acid and alkali, and prevent early damage caused by slipping and corrosion.

3. The elastic belt of the ribbed v belt should be kept tight, and the elastic belt needs to be constantly checked and adjusted to ensure that it meets the requirements.

4. The ribbed v belt should be checked for excessive wear. The wear and the ribbed v belt of the pulley will lead to tears of inconsistent belt tension caused by excessive wear, but it will also lead to unstable belt in the groove, causing accidents, such as sliding or overturning. It is necessary to do a good job in the inspection.

5. The old and the new cannot be used for mixing. If you need to replace two or three or more ribbed v belt, please select the specified type of ribbed v belt and keep the consistency between each group.

6. The machine tool shall be disassembled and stored separately. In addition to normal maintenance, it is also important to determine the correct operation method and correct operation to determine the service life of the ribbed v belt in normal use.

Operating temperature of ribbed v belt

The working temperature of the ribbed v belt is generally 65 ℃ below zero and 180 ℃ above zero.

The function of ribbed v belt

1. In case of overload, the drive belt will slip on the pulley, which can prevent the damage of weak parts and play a stable and precious role.

2. It is applicable to mechanical tools, inventory equipment, miniature appliances, hair dryers and woodworking machinery and other industries.

3. The transmission is stable, the noise is low, and it has the effect of buffering and vibration absorption,and the cost is reduced.

4. Not afraid of ozone and most environmental factors.

5. The skeleton is carbon fiber rope, which has a relatively low elongation and good flexibility; Proprietary tooth structure provides high shearing force keyword ranking, low noise, and improves transmission power; At the same time, polyurethane has oil resistance.

6. The structure is simple, and the manufacturing and installation accuracy requirements are not high, so the use and maintenance are convenient.

7. The back groove design provides good stability and flexibility.

8. The meticulous manufacturing method enables it to run quietly.

9. Accuracy, correct synchronization, low noise, good anti-wear characteristics.

The above is an introduction to the daily maintenance method and working temperature of the ribbed v belt. I hope it will be helpful for you to know the ribbed v belt.