The Reason for The Slippage of The Rubber Fan Belt

The main reasons for the slippage of the rubber fan belt are as follows:

1. Insufficient friction between the V-belt and the pulley: If there is dirt, oil or water stains on the surface of the V-belt, it will reduce the friction and cause slippage. In addition, if the operating environment temperature of the V-belt is too high, such as frequent starting, braking, etc., it will also reduce friction and lead to slipping.

2. Loose V-belt: Loose V-belt can cause slippage between the belt and the pulley, especially during heavy loads or high speeds, making it more prone to slipping.

3. Loose fit between the V-belt and pulley: If the V-belt and pulley do not fit tightly, it will cause the V-belt to loosen during operation, leading to slippage.

4. The manufacturing accuracy of the V-belt pulley is not high: If the manufacturing accuracy of the V-belt pulley is not high, it will lead to diameter deviation of the pulley, thereby affecting the tension of the V-belt and causing slippage.

To solve the problem of rubber fan belt slippage, the following measures can be taken:

1. Adjust tension: Regularly check the tension of the V-belt. If insufficient tension is found, adjust the tensioning device in a timely manner to ensure sufficient friction between the V-belt and the pulley.

2. Replace with better quality V-belts: High quality V-belts have higher wear resistance and tensile performance, which can extend their service life and reduce the occurrence of slipping.

3. Regular maintenance: Regular maintenance of the V-belt, including cleaning the surface of the V-belt, replacing lubricating grease, etc., can improve friction and reduce the occurrence of slipping.

In short, there are multiple reasons for the slippage of the V-belt, and corresponding measures need to be taken from multiple aspects to solve it. At the same time, choosing high-quality V-belts and suitable pulleys is also the key to ensuring the normal operation of V-belts.