The "five preventions" should be done in the storage of agricultural machinery during the slack period:

Due to the seasonal nature of the use of agricultural machinery, agricultural machinery can often only complete one or several operating items within a year, with few working hours and long parking and storage time. Generally, agricultural machinery and tools do not need to be built in warehouses like industrial machinery. They are often placed in the open air, subject to wind, sun, and rain. If they are not carefully stored, the damage to the machinery during parking will far exceed the wear and tear during work. In order to prolong the service life of machinery and tools, the "five preventions" should be done in the storage of agricultural machinery during the slack period:

Anti-corrosion: After the field operation is completed, the external mud must be removed, the seeds, fertilizers, pesticides and crop residues in the work organization must be cleaned up, if necessary, cleaned with water or oil; cleaned each lubrication part and re-lubricated; the most complex precision machinery It is better to store in a cool, dry and ventilated room; simple machines and tools can be stored in the open air, but they should be placed in a higher, dry, and not directly exposed to sunlight. It is best to be covered by a shed; all parts that are in direct contact with the ground, Use wooden boards or bricks to support; the protective paint that fell off should be repainted.

Anti-corrosion and mildew: wooden parts are easily corroded, cracked and deformed by rain, wind, sun and microorganisms. Paint on the surface of the wood and store it in a dry place; textiles such as canvas conveyor belts should After being removed, washed and dried, stored in a dry, pest-proof place indoors.Anti-aging: Rubber or plastic products are susceptible to deterioration due to oxygen and ultraviolet rays. You can apply hot paraffin oil to the surface, place it on the indoor shelf, cover it with paper, and keep it ventilated and dry, away from direct sunlight.

Anti-deformation: Springs, transmission belts, long tool bars, tires, etc. will produce plastic deformation due to long-term stress or improper placement. During storage, proper support should be provided under the frame so that the above components do not bear the load; all mechanically compressed or stretched The opened spring must be relaxed; remove the transmission belt and keep it indoors.Loss prevention: For long-term parked machines, a registration card should be established to record in detail the technical status, attachments, spare parts, tools, etc. of the machine; it is strictly forbidden to disassemble the parts for other purposes during storage; if there is no warehouse machine parked outdoors, the motor, Remove easily lost parts such as transmission belts, mark them, and store them indoors.