How to Maintain the Motorcycle Transmission Belt
Publish Time: 2023-07-27 Origin: Site
Nowadays, there are many cycling enthusiasts who have high requirements for the lifespan of motorcycle belts due to the generally long cycling distance. If the wear resistance and high temperature resistance of the belts are not high, it can also harm motorcycles. Therefore, it is not only necessary to choose a motorcycle belt with a long lifespan, but also to pay attention to how to maintain the motorcycle transmission belt.
How long does the motorcycle belt need to be replaced
The typical motorcycle belt is replaced every 30000 kilometers, but the belt warranty from Heiyi Rubber Co., Ltd. is relatively long and can be used for a longer time, with a minimum of 100000 kilometers.
How to replace the motorcycle belt
A car's belt has two timing belts and an accessory belt. The replacement cycle of timing belt is the same for almost all Almost all. It is about three years or 60000 km. At the same time, the tensioner pulley and idler pulley need to be replaced at the same time. Because the life of the belt and the tensioner pulley is almost the same, the life of the belt is up. Even if the tensioner pulley can still be used now, it is unknown how long the life is left, and it is impossible to replace it with 20000 km, Therefore, changing the belt also requires changing the tensioning wheel.
How to maintain the motorcycle transmission belt
1. The replacement mileage and cycle for engine belts are generally five years or 100000 kilometers. This time and mileage are only estimates, and the quality of belts varies for different vehicle models. Please refer to the manual for details.
2. On the inner side of the engine belt, there is a turtle row situation that also needs to be replaced, indicating that it has aged. The inspection method is also very simple, just find the belt, open it and take a look.
3. Oil, Gear oil and other corrosive liquids dripped on the belt carelessly need to be replaced even if they are cleaned, because they will harden the belt, and the engine belt will suddenly break after a long time, which will affect driving safety. Be careful not to drip this on the belt during maintenance.
The above is some relevant knowledge on how to maintain motorcycle belts, hoping to be helpful to motorcycle belt dealers or cycling enthusiasts.