The Causes And Solutions of Cracks in Rubber Belts

The causes and solutions of cracks in rubber belts

Cause of cracks:

1. The diameter and installation position of the tensioning wheel do not meet the requirements;

2. Severe slipping;

3. The diameter of the pulley is lower than the smaller allowable diameter limit for automotive transmission belts;

4. Chemical factors have an impact.

Solution:

1. Pay attention to the installation method and meet the installation requirements;

2. Adjust the tension as required;

3. Redesign or use toothed rubber belts;

4. Improve conditions or use special V-belts.